Three Major Maintenance Methods For Skates And Skates

How to care for your skates and skates

①After each skating, use a soft cloth to wipe the contact surface of the knife body, knife seat, sole, and screws clean. When the screws are rusted or the leather is rotten, the screws will loosen. Put it into the skate soft holster to avoid moisture or damage.

(Note: Be sure to choose a soft knife cover to store the skates, because the soft knife cover has the function of absorbing water and moisture, so that if there is still moisture that has not been wiped dry, it will be absorbed to prevent the skates from rusting)

②The ice skates must not come into contact with acidic substances to prevent rust.

③Wet skates cannot be baked with fire, they should be wiped and dried.

④After winter, before storing the skates and skates, wipe the skates clean and put some butter on them; use a cloth dipped in detergent to wipe the stains on the skates, dry the shoes in the shade, apply a layer of shoe polish for leather protection, and put on the inside of the shoes Filled with balls of paper to absorb moisture inside the shoe. If it is an artificial leather skate, just use ordinary detergent to decontaminate it, and then put on the shoe cover for storage.

Correct maintenance steps for skates and skates

1. Clean the stains on the surface of the skates

1) The plastic part of the shoe can be wiped with a cloth dampened with water.

2)Use a cloth dampened with water to scrub the stains and sweat stains on the inside and outside of the shoe cover.

3) Knead the waste newspaper into a ball, stuff it in the shoe, and fasten the shoelace. It must be stuffed tightly to prevent backlog and deformation, and squeeze your feet when wearing it again.

2. Cleaning and maintenance of ice skates

1)The skates should be wiped dry in time after each skating.

2)Before storage, the remaining stains and rust on the skates should be wiped clean.

3) Put it in a cool and ventilated place to dry, do not expose to the sun.

4)Apply petroleum jelly or engine oil to the blade.

5)Set up the soft knife cover and seal it with a plastic bag (it is better to put some desiccant in the plastic bag) before storing it.

3. Choose a dry and ventilated place when placing

Avoid deformation caused by extrusion and affect wearing.

During the rainy season, take it out for inspection and dry it frequently to avoid mold.