UFS And Skate Frame Material

UFS (Universal Frame System)

This is the first real agreed on standard where industrie leaders got together, discussed it and rolled it out all together in 2001 within the aggressive skating market. Before 2001 each aggressive skate made up their own type mounting, often using their own interpretation of the original mount.UFS mounted skates are often lower to the ground. This is because they have a smaller mounting block then 165mm mounted skates. 

The UFS standard was initially primarily used for frames with tiny wheels (60mm and smaller). About ten years ago, Salomon and Rollerblade produced the first huge wheel frames. Today, the UFS frame industry is bursting with possibilities. With UFS skates, you may purchase wheels up to 125mm in diameter and skate anything from 2 to 5 wheels.

Frame material

The bottom of the skate is known as the "frame." Its main purpose is to transmit energy from what your foot is doing to those wheels since it is what holds the wheels in place.

For it to function correctly, it must be rigid to ensure that none of the foot movements are wasted when the frame transmits them to the wheels.

The wheels on the frame should move 1 mm if your foot moves 1 mm.

You could shift your foot without moving the wheels if the structure was shaky. A good frame responds to commands and carries them out. A terrible frame is one that squanders a lot of control and energy. This will cause a lag in the steering and overall handling. You might compare it to being in a car while the steering wheel is loose. A frame like that is not the frame you want, and neither is this the automobile you want.Your energy is also absorbed by a poor frame. If you push off, the frame will flex under your force rather than moving ahead.

Weight of the user 

The amount of stiffness also depends on the weight and strength of the user. If you put more force on the frame with your weight and/or power, then you need a stiffer frame. That is why kids are okay with plastic frames, but most adults are better off with a metal frame to skate with.

Types of frame material

UHMW, very slippery plastic made for grindingGeneric, aggressive plastic frames are just fine.7000 and 6000 aluminum. 6000 is cheaper and more flexible. 7000 is more expensive to make and more stiff.Carbon is very expensive and fragile.

Materials weight 

Plastic is light, so it is best for a child.Metal is heavier. The little bit of added weight is not that bad for an adult, and the benefits of the strength outweigh the weight.Carbon is the lightest.